Відео

In my experience I'd say roughly 8 months to a year easy without taking care of it, (boosters,bad wash soap etc)... but with good maintenance and proper sio2 safe soap 1-2 years is probably max. In my experience. I like the stuff for the price and application and I'm in Florida so the sun is beating on the boats and cars here hard. I think I used 2 thin coats and had plenty left

Very cool. They are nice boats for sure, you have some cool lake neighbors I bet! Have a great weekend

Glad to hear. Have a great day

It's more of an issue when you have 1-5 acres and you get tired or touching pto every time you back up . Cheers

You're very welcome! Thanks for watching

It is usually easiest to have someone press on the accelerator pedal with the engine off and someone else. Look at the carburetor and you will see where the cable is moving and the screw stops the cable. When the accelerator pedal is released. So if you watch the carburetor and have them press. And release the pedal a few times you will see where the cable cable goes to the carburetor and there will be a screw or there should be a screw somewhere there just turned a counter clockwise.

No problem. Thank you for watching. Thanks for the comment also!

I got it and it's not finding abs codes. And abs vsc brake light is on..

You bet! Thanks for watching

I live in Florida and I'm from Florida, in the ocean every day lol

These tires are very quiet their whole life and last a long time my dad had a set of these go 75k miles with pretty bad front end alignment

Yes it is, fine boat for the price if it's maintained. Cheers, and thanks for watching

Way cool, heard he was a nice guy. Thanks for watching and commenting

When you go over a bump or small jump the back end bucks your butt off the seat , the belt is to keep lighter riders more connected to the kart , it's very hard to roll this one and I'm not sure if wearing a seat belt would increase any injuries or cause them but anything is possible. Thanks for watching and your point of view

No problem. Thanks!

Thanks for watching and sharing your experience you had with this product

Sorry it didn't work long term for you, thanks for sharing your experience with the heater for others to consider.

If you know the part # check west marine, Amazon and ebay. I always check for original parts first then get knockoff if absolutely necessary, but even big manufacturers with factory parts can be found on Amazon and eBay these days. And you can always check with dealers who sell and service tohatsu motors as nissan and tohatsu were the same then I thought. Hope this helps, thanks for watching

10 is what was used in the installation. Thanks for watching

We live in Florida and get some bad weather, we've drove this in about 8 to 10 Inches of water with no issue for us, but good question

Typically on something like that the microswitch may be faulty causing it to flush twice or the inlet valve may be clogged with debris or faulty causing too much water to be introduced to the system. Hope this helps. Thanks for watching

@@TonyCampCamppartyof4 Well it's a brand new toilet in a new bathroom install. So it shouldn't be clogged. Only thing that makes sense is that the switch is faulty from the manufacturer.

@troycarls4839 you are correct it shouldn't be clogged, did you do the install or someone else? I've seen it all, I just finished rebuilding a pressure washer pump that was brand new and had a piece of metal shaving in the valve not letting it close all the way. the company sent me a new pump and I rebuilt the original one and now have a backup . But the most likely culprit is a faulty microswitch or something. Good luck and if it's all new it is under warranty ,

Yes super easy, I went through 2 walls then 50' underground over to the septic tank. Good luck. The woods is always a good idea also. Keep it real and thanks for watching and you comment

​@@TonyCampCamppartyof4Hey Tony....I would like to know is it overly loud when flushed? I did hear it flush in the video but there could be different in person...I've read some reviews saying it sounds like a jet engine when flushed.

@darkellthepiercer it's a little quieter than my cordless vacuum, sounds as loud as when the dishwasher is emptying the water or maybe a quiet blender. Hope this helps

@@TonyCampCamppartyof4 I don't have a dish washer so I'm not sure what that sounds like 😆 but is it as loud as your standard toilet?

Your welcome

No problem

Thanks for saying thanks and watching

If you have an existing sprocket, you just go by the sprock at the distance between the teeth. Yes, and also there is sometimes a small number stamped on there. It will be something like #35 (average chain) or #41 or #428 etc.. sometimes it's stamped on one of the sprocket teeth. If you do not have a existing sprocket. Or driven gear on the axle. you will buy whatever Fits the drive shaft on the engine. Usually comes in a sprocket and chain set or you can piece it together. Check Amazon and gopowersports.Com hope it helped a little. So check the Sprocket on the engine for any numbers and the driven sprocket or gear That is attached to the rear axle If you do not have those, you will have to do a custom job.

@@TonyCampCamppartyof4 thank you very much.🤙

Great! You won't be disappointed. Smooth with more grip than most tires on the market. Great for dry,wet snow and ice. I would recommend a mud tire for mud and these for all else. Thanks for watching and commenting

Drive a little slower than usual Don't suck up wet grass/leaves Maybe try mulching blades Make sure the vacuum motor is running at max speed. Suck up more often/ don't let grass get too long or leaves too deep. Inspect fan housing for buildup and clean as needed,. Look for anything in the hose that is sticking out catching or grabbing the grass. Make sure you have good seals between the fan and the mower deck so air isn't getting sucked in anywhere, no holes in hose or loss of suction at joints? These are a few things to look at. Hope it helps. Cheers